Finishing
The flooring is unfinished. There are several finishing options.
Penetrating oil finishes have largely replaced polyurethane in
popularity. The disadvantage to polyurethane is that when wear occurs
in highly- trafficked areas, the entire floor must be sanded and a new
coat applied.
Penetrating Oil Finish
A penetrating oil finish can be touched up when wear
spots occur. A penetrating oil finish, as the name suggests, penetrates
the fibers of the wood in the initial coat. Subsequent coats provide a
finished appearance. You will find several online sources of penetrating oils on our Resources page.
Staining or Painting
If you wish stain to add a richer color, apply it
the finish coats. If applied in the initial coat it may bring out the
grain pattern alarmingly. There are penetrating oil finishes in a wide
range of color choices.
In early New England homes, pine floors were frequently painted, an idea that horrifies contemporary sensibilities unfamiliar with the cheerful results.
Sanding
In early New England homes, pine floors were frequently painted, an idea that horrifies contemporary sensibilities unfamiliar with the cheerful results.
Sanding
The planing of the boards is top-quality. We do not think machine
sanding after installation is necessary, although a small amount of
hand-sanding might be necessary. If you do intend to sand, be sure the
nailheads are well counter-sunk so that you do not grind the nailheads.
